Don’t Panic Immediately, Do This Immediately When Your Vehicle Experiences Brakes Failure

The incidence of brake failure is often the cause of accidents. That is why, it is very important to check the vehicle before traveling. Moreover, will be traveling far.

But if your vehicle suddenly experiences brake failure while running, the first thing to do is to make sure you stay calm, while being alert. Do not even panic because it makes concentration dispersed. What should be done?

These are a number of important steps you must take when you notice your vehicle’s brakes are problematic. So that it can prevent unwanted effects such as a series of accidents.

1. Keep Pumping the Brakes

You have to keep pumping the brakes so the pressure can return to normal. If the vehicle suddenly switches to anti-locking braking or ABS, just keep pumping.

Over time, the pressure on the brakes will return to normal. However, if the brakes feel rough or heavy when pumped, there may be something on the pedals. You can check the brakes to find out what’s stuck in the pedals.

If you’re driving, ask another driver to check the pedals. You can slow down a little so that you can check the pedals so that the brakes are functioning properly.

2. Lowering Transmission Gear

Another way that can be done is to lower the transmission gear on your vehicle. Take advantage of the effect of the engine brake to lower the transmission gear on the pedals of your car.

In this case there are steps that need to be done. First, make sure your car is manual, not automatic. If it’s manual then the method is to lower the transmission gear gradually and do it with fast movements.

If you are in 4th gear then lower in quick motion to first gear. Do not let you lower it gradually, for example from 4 directly to number two.

It will cause your car to run out of control. However, if your car is included in the type of automatic or automatic transmission then the way is the other way around. Just lowered it to gear number 1.

So, there is no need to gradually lower it like a manual type car. This will make your car go slower. Over time the brakes will return to normal. Make sure you can do this so that nothing bad happens while the car is being driven.

3. Use Handbrake

If the first and second methods still fail, you can use the handbrake. But you have to be extra careful when doing it. When you want to brake, do it slowly. The trick is to pull the handbrake carefully and feel the bite on the wheel caliper.

If you feel the brakes have bitten then don’t let go and let it go until the car slows down. You also have to be able to adjust the brake pressure so you don’t suddenly lose control. Remember, do not do it suddenly, it can endanger yourself and other motorists on the road.

4. Press the Hazard Light and Horn button

If your car suddenly has brake failure, all you need to do is press the horn and turn on the hazard lights. This method is done to signal other vehicles to know that your car’s brakes are not working. Make sure that you are calm and don’t panic because it will harm you and those around you.

After that, step on the pedal slowly. If the pedal can touch the floor of the car, maybe the brake fluid in your car is running low. There could also be problems with parts such as the master cylinder and brake calipers. Then what? 5. Don’t Immediately Turn Off The Machine

Immediately turning off the engine when you realize the brakes fail is not recommended. Because it will make it difficult for the car to keep going. The brakes can’t return to the way they were before. Do some of the steps above to restore the condition of the brakes.

6. Don’t step on the gas pedal

Calmness allows you to take the correct steps to control the speed of the car. Because panic conditions can make you step on the wrong pedal, namely the gas. As a result, the car is not actually slowing down instead going at high speed. Cars traveling at high speeds with failed brakes can cause road accidents.

7. Shaking the Brake Pedal Part

You can also shake the brake pedal if it suddenly fails, but remember, don’t step on it. Just shake the pedal slowly until the brakes return to their original state. Sometimes the cause of sudden brake failure is due to a system problem.

8. Bumping into Soft Objects

If those measures don’t keep the vehicle under control, you’re going to have to look out the window for something soft. For example, if there is a muddy area, direct the car to it. Crashing a car into something soft can stop it going.

You can also hit other objects such as sand dunes, wooden fences and so on. The point is objects that are safe to hit so that the car can stop and reduce its impact on you and the surrounding environment.