8 Tips on how to get rid of car glass mold without going to the workshop

The recent scorching heat and intermittent rain are unpredictable; hot morning, rainy afternoon and late afternoon hot again. Even in the scorching heat, it still rains quite heavily. Apparently, this can also interfere with the condition of the vehicle, including the emergence of windshield fungus due to rain drops that dry up quickly before being cleaned.

Glass is an important component because it affects visibility in driving, if there is dirt or even mold that sticks to the glass, it will greatly interfere with your driving comfort. The following is an explanation of the next autotips article about several ways that can be done to remove car windshield mold correctly and effectively.

Causes of Moldy Car Glass

The following are some of the causes that produce moldy car windows. The causes in question are residual rainwater that is still attached to the windshield, incomplete drying of the car after washing, and poor water quality.

Remaining Rainwater Still Sticking to the Glass

After the rain stops, there will definitely be rainwater that is still attached to the windshield. If it is not cleaned immediately, the former rainwater will be difficult to clean, especially if it has been dry in the sun. Residual rainwater that dries due to sunlight can cause moldy car windows.

Car Drying After Washing Imperfect

Moldy car windows can be caused by an imperfect car drying process after washing the car. In general, after washing the car, drying is done using a cloth. However, if this process is not optimal, it will leave residual water in certain parts such as car windows.

Poor Water Quality

Poor water quality can be the cause of mold on the windshield. Water that has a high enough lime content can cause mold on the windshield. Salt water or sea water can also cause moldy car windows.

Moldy Car Glass Characteristics

It’s easy to spot moldy windshield marks. If you look closely, the moldy car windshield shows white spots. The appearance of this hardened white spot is a fungus on the windshield. Many of these spots can be seen at the end of the car window. In this section a lot of people are infested because water often settles in the area for a long time and then dries up. If left unchecked this condition will make it easy to grow windshield fungus.

Understand the Important Functions of Spoilers in Your Car

The following is a guide on how to remove mold on car windows independently without having to take it to a repair shop. The methods in question start from cleaning the glass after it rains, using mildew cleaner on car windows, using soda drinks, using toothpaste, using clothes bleach, using alcohol, applying apple cider vinegar, using tobacco water, to using baking soda.

Using Baking Soda

White crystalline powder or commonly known as baking powder is an effective mildew remover on car windows. This method of removing mold with this material is non-toxic and does not harm humans. This ingredient not only effectively removes mold but also absorbs residual moisture which promotes mold growth. A simple mixture of baking soda and water forms a powerful cleaning solution that can be sprayed on and cleaned easily. It is one of the most common and economical cleaning solutions for mold on windshields.

Clean After It Rains

The easiest thing to do is to clean the glass immediately after it rains, because the raindrops that stick to the glass have the potential to have a mildew effect on the glass. Cloths for cleaning can also vary, after using a ‘chaebo’ cloth, it can be cleaned again with a microfiber cloth. Don’t forget to also check the rubber on the wiper blades, because it will affect the cleanliness of the glass. If the rubber blade is not able to clean completely, replace it immediately.

Use Special Cleaner

However, if the fungus is stubborn on the glass, of course it must be cleaned specifically. If you want to clean yourself, without going to a car ‘salon’, then you have to pay attention to a few things. Among other things are the materials or compounds used, lest the windshield should be free of mildew, even blisters due to the use of the wrong material and the emphasis when cleaning is also too hard.

There are several brands of cleaners or mildew removers on the market that are used to clean and prevent mold on windshields. Glass Scrub can be used when the fungus is visible on the glass, then it can be smeared with Rain Clear to keep it clean and serves as a prevention.

Of course, the most important thing is the windshield, although the side and rear glass are not immune from fungus attack. Routinely coat the glass with an anti-mildew material to keep the glass clean without disturbing while driving. Glass that has been coated with Rain Clear, generally lasts between 3-4 months depending on conditions and weather.

Using Soda Drinks

If you don’t find a cure for car windshield fungus, soda also turns out to be effective in getting rid of your windshield fungus. The trick, clean the windshield to dry using a cloth. Next, wet a soft cloth or toothpaste with soda water, then rub it gently on the windshield affected by the fungus.

Do this until the fungus on your windshield is gone. You need to remember, don’t mix soda water with plain water, because it can reduce the soda content which can eliminate the fungus.


Well, use toothpaste in your home to get rid of car glass mold. This is a natural event that is quite powerful. Due to the presence of substances in toothpaste that can eliminate the fungus.

All you have to do is apply toothpaste to the part of the windshield that is affected by the fungus, then let it sit until it dries. Once dry, rinse off the toothpaste using a brush or soft cloth with water and immediately dry with another cloth.

Using Clothes Bleach

Not only stains on clothes, the bleach in your home can also be used as a mildew repellent on your windshield. Do it with a soft cloth first using the bleach to taste.

After that, gently rub the cloth on the windshield until it’s clean. Remember, use a soft cloth so that when rubbed against the windshield it doesn’t scratch.

Use Alcohol

You can also use alcohol as a way to get rid of mold on your windshield. How to? It’s easy, you can use a cotton swab that has been dipped in alcohol content above 60%. Then rub gently into the glass affected by the fungus.

Using Apple Cider Vinegar

Next is to use apple cider vinegar. The trick, mix 3 tablespoons of apple cider vinegar with 1 liter of water. After that, dip a soft cloth into the mixture. Next, rub the cloth on the affected part of the fungus until it is completely gone.

Furthermore, after the fungus is gone, immediately dry with newspaper immediately. You will see that there is no more mold stuck to the windshield.

Use Tobacco Water

The last is to use tobacco water. There are several steps you have to do using the water.

First, soak the dried tobacco in clean water for 15 minutes. Before rubbing into the windshield, clean the windshield affected by mildew with cold water. Now, after drying, immediately pour the mushrooms on the windshield with the water that has been soaked in the tobacco.

You can try watering it several times until the fungus is completely gone. After it looks gone, rinse again with clean water and wipe dry.